Installing anchor technology is a common reinforcement method in building structural reinforcement, and ianchor glue is a commonly used reinforcement material in the process of installing anchor. Among them, there is a injection adhesive called injection-type reinforcement anchor glue, which can simplify and improve the reinforcement construction of installing anchor reinforcement. Next, let's take a look at how easy it is to use the injectable tendon planting glue!

First of all, the injection-type reinforcement glue is injected by injection. After we install the reinforcement glue on the glue tool, it can be used. This omits the process of manual compounding, and it is more in place than manual mixing, and the compounding and mixing will be more uniform. In the process of use, the injection-type planting glue can be used and stopped at any time. If it is not used up, the bottle cap can be tightened to save it without waste. It can be used again if it is stored correctly. The planting glue that needs to be manually stirred must be prepared and used, and there may be waste. Therefore, the injection-type planting glue has the advantages of accurate proportioning, rapid glue injection, time-saving and labor-saving in terms of glue dispensing and glue injection.

Secondly, from the perspective of the thixotropy of the injection-type planting colloid, the excellent thixotropic properties can bring great convenience to the construction. Before understanding colloidal thixotropy, we must first know: what is thixotropy? In fact, thixotropy means that when the colloid is stirred, the viscosity of the colloid will drop rapidly, which is convenient for construction. When the stirring is stopped, the viscosity of the colloid will increase immediately and will not flow freely. Therefore, the thixotropic injection-type rebar-planting glue does not sag or sag after injection. When the thixotropy is not good for planting reinforcement anchoring glue, it is easy to leave empty space after glue injection, which affects the bonding effect, and also pollutes the surface of the substrate. In addition, it is also necessary to have good thixotropy during the screw-in process of the steel bar, so as to ensure good contact between the colloid and the steel bar, so that the colloid can fully and evenly wrap the steel bar.

All in all, the injection-type anchor glue can save manpower on the one hand, ensure that the colloid is mixed more uniformly, and can accurately inject glue while achieving simple operation. On the other hand, the good thixotropic properties of the colloid ensure that the construction operation does not flow, the glue is applied more uniformly, and the reinforcement effect is better, and it can also bring greater economic benefits.